Centos 配置eth0 提示Device does not seem to be present
2014年10月27日 21:16:54 xiaobei4929 阅读数：75888
 
一.故障现象：
 
[root@c1node01 ~]# service network restart
 
Shutting down loopback insterface: [ OK ]
 
Bringing up loopback insterface: [ OK ]
 
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
 
 
 
解决办法：
 
[root@c1node01 ~]# rm -rf /etc/udev/rules.d/70-persistent-net.rules
 
[root@c1node01 ~]# reboot ………………
 
[root@c1node01 ~]# service network restart
 
Shutting down loopback insterface: [ OK ]
 
Bringing up loopback insterface: [ OK ]
 
Bringing up interface eth0: [ OK ]
 
[root@c1node01 ~]#
 
 
 
二.另一种方法
 
造成这样的原因，是因为在虚拟机（Vmware）中移动了Centos系统对应的文件，导致重新配置时，网卡的MAC地址变了，输入ifconfig -a,找不到eth0
 
·······安装完一个centos虚拟机，又拷贝一份，开机后网卡无法正常启动，报错：Device eth0 does not seem to be present, 
delaying initialization
 
解决：# mv /etc/sysconfig/network-scripts/ifcfg-eth0 
sysconfig/network-scripts/ifcfg-eth1
 
vim 
sysconfig/network-scripts/ifcfg-eth1
 
修改DEVICE="eth0" 
为DEVICE="eth1"
 
 
 
可删掉uuid、物理地址
 
然后重启启动网卡尝试下